Buell – Workshop Tools

Description Used to release clutch spring for removal and installation of retaining ring. Adapter for XL Sportster models is included. Fitment 90-9...

Description Removes and installs the 2-1/2" hex nut (35211-91B); the thin but large left hand threaded nut; that holds the rear transmission sprock...

Description- Used to install H-D exhaust gaskets into the cylinder head - Attaches to a 3/8" drive socket extension for precise gasket positioning ...

DescriptionOptional adapter for MCS 998141 valve spring compressor tool. Allows working with one-piece conical ''Beehive'' style valve springsFitme...

DescriptionNo. 15: For cam bushings in cam cover. Dual end gauge pin; one side is a Go other side is No-Go gauge. Used to check if the tolerance of...

DescriptionNo. 16: For pinion shaft bushing in cam cover. Dual end gauge pin; one side is a Go other side is No-Go gauge. Used to check if the tole...

DescriptionUsed to remove old and install new bushings into the connecting rod within minutes. Installs and removes without hammering or pounding w...

DescriptionUsed to remove and install the wheel bearing races; of Timken style bearings; of models with 3/4" (19mm) diameter wheel axles. The Fast ...

DescriptionUsed to install & remove the Timken style neck races in the frame neck or in the frame cup. Works with all models with a 1" steering...

DescriptionUsed to store the hydraulic lifters (hydraulic tappets). Tool is position marked so; after the work is done; the lifter can be reinstall...

DescriptionUsed to pre-bleed the hydraulic units; to help prevent valve train damage after initial engine start due to incomplete bled tappets. Sim...

Description With 10mm & 12mm threaded ends. Used to help hold the cylinder head firmly in a workbench vice; through the spark plug hole; to aid...

Description Blue anodized aluminum. With laser etched tappet locations. Used to store the tappets and anti-rotation pins when removed from the engi...

Description No more wrestling exhaust pipe retaining rings. This tool is designed to install the exhaust retaining ring (OEM 65325-83A) quick; easy...

Description Used to hold the cylinder head (OEM & all aftermarket heads). a special valve guide alignment shaft is designed into this tool and ...

Description With 12 & 14mm threaded ends. Used to help hold the cylinder head firmly in a workbench vice; through the spark plug hole; to aid i...

Description Two-piece design; Used to install & remove the races in the frame neck or in the frame cup. The optional 978339 X-tra grip driver s...

Description Used to press-in frame neck bearing races and frame cups; straight and true without damage. Note: See 962041 for 14-up Touring; Trikes....

Description Used to align main and countershaft when checking for proper gear spacing Fitment86-90 4-speed XL Sportster, Buell (NU)Product Details ...

Description Used between primary chain and front motor sprocket to prevent primary movement when loosening & re-torquing sprocket & clutch ...