Touring – Engine

DescriptionEV27 Cam Capable of 6000+ rpm with stock springs and no valve float Bolt-in street cam with fast open and close ramps Uses stock springs...

DescriptionEZ-Install Pushrods EZ-install pushrods eliminate the need to disassemble your rocker boxes or remove the gas tank when changing cams or...

DescriptionEZ-Install Pushrods EZ-install pushrods eliminate the need to disassemble your rocker boxes or remove the gas tank when changing cams or...

DescriptionAdjustable Pushrods Andrews completely adjustable pushrods easily replace the nonadjustable stock pushrods on H-D engines Made in the U....

DescriptionValve Spring Upper Collars Similar to stock 80-style parts, but lower profile for easier installation of higher lift cams Required parts...

DescriptionMedium-Lift Upper Spring Collar Set Intended to work with stock springs and add approximately .060" spring travel with no other modifica...

Description57 Series Grind Cam Bolt-in broad tip cams; 96" , 103" Limited and 110" CVO engines Cams work best at rpm range of 2200-5600 Specificati...

DescriptionCam Set for Chain Drive Broad tip cams for baggers with stock motors; max torque at low and mid rpm ranges Manufactured with the help of...

Description7 Grind Cam Great street cam, especially for 84/88-inch strokers with maximum torque from 2,200 to 6,500 rpm Upgraded version of the ori...

DescriptionCam Set for Chain Drive Manufactured with the help of a computer with cam design capabilities Made from alloy steel billets and heat-tre...

DescriptionConversion Chain Driven Cam Allows upgrade of the '99-'06 Twin Cam (except '06 Dyna Glide) to the newer roller-style cam chains and repl...

DescriptionCam Set for Chain Drive Manufactured with the help of a computer with cam design capabilities Made from alloy steel billets and heat-tre...

DescriptionCam Set for Chain Drive Manufactured with the help of a computer with cam design capabilities Made from alloy steel billets and heat-tre...

DescriptionCam Set for Chain Drive Manufactured with the help of a computer with cam design capabilities Made from alloy steel billets and heat-tre...

DescriptionEV23 Cam Capable of 6000+ rpm with stock springs and no valve float Bolt-in cam for heavier touring bikes and high-geared bikes with 65-...

DescriptionHigh-Lift Valve Springs Provide correct spring force for any of our performance cams when used in 74" and 80" motors Max lift; installat...

DescriptionEV13 Cam Capable of 6000+ rpm with stock springs and no valve float Bolt-in cam for street or touring use with more mid-range and upper-...

DescriptionCam Set for Chain Drive Manufactured with the help of a computer with cam design capabilities Made from alloy steel billets and heat-tre...

DescriptionJ Grind Cam More mid-range and top-end power for street and drag bikes. These cams work with solid or hydraulic lifters, and the idle re...

DescriptionCam Set for Chain Drive Manufactured with the help of a computer with cam design capabilities Made from alloy steel billets and heat-tre...

DescriptionCams for M-Eight Bolt-in cam for stock compression 107" and 114" engines For touring-style riding Bolt-in cam for stock compression 107"...

DescriptionCam Installation Kit Includes all gaskets, bearings and hardware necessary to install gear-driven cams Made in the U.S.A. Specifications...

DescriptionAdjustable Pushrods Andrews completely adjustable pushrods easily replace the nonadjustable stock pushrods on H-D engines Made in the U....

DescriptionReplacement Pushrod Kit Pushrods fit Shovel engines using stock diameter tubing so there is no cover tube interference For stock stroke ...