JIMS

Description Supports piston when installing rings and cylinder FitmentAll H-DProduct Details Brand: Jims Category: TOOLS > TOOLS ENGINE Unit...

Description Used to secure the engine balancers when servicing the flywheel assembly. This tool locks into the balancer's sprocket pin holes and pr...

Description Used to pull the engine balancer bearings from the case in one easy smooth motion; thus preventing any damage to the bearing bores. Ins...

Description Replacement for 978407 JIMS connecting rod lap set Product Details Brand: Jims Category: TOOLS > TOOLS ENGINE Unit: SET Product...

Description - Used with replaceable conrod races - Includes 1-1/2" and 1-5/8" OD laps. Note: For replacement lap heads see 978409 for 1-1/2" OD lap...

Description With a elongated rear oil hole for better crankcase vacuum; especially with large capacity engines. Manufactured from aerospace quality...

Description - Cradle only - Use with 978395 base stand Fitment 99-17 Dyna 99-16 FLT/Touring (NU) Product Details Brand: Jims Category: TOOLS >...

Description Pulls 29981-95 (38A) & 29999-97A/B (45A) style; and similar; rotors with a threaded pull action from the sprocket shaft. Especially...

Description - Engines with 0.927" diameter wristpin - 4.5" (11.4cm) long - Used to check wrist pin and connecting rod straightness without removing...

Description Holds the connecting rod firm and steady when reaming or inserting piston pin bushings. Tool is mounted to the engine case. Repl. 95952...

Description Used to remove & install the right (pinion shaft / cam) side crankshaft bearing on Softails Fitment00-17 Twin Cam Softail (Excl. Dy...

Description Used to remove the camshaft gear; Note: Use 978294 tool to install/reposition the cam drive gear Fitment70-99 Big Twin (Excl. Twin Cam)...

Description Remove & install all 3/4" (19.05mm); 1" (25.4mm) and 25mm ID wheel bearings; Note: Use 978641 optional support plate for 14-up Tour...

Description Used to hold the cylinder head (OEM & all aftermarket heads). a special valve guide alignment shaft is designed into this tool and ...

Description Used to check the inner size of the cam needle bearing. With not enough press-fit the cam can rock; causing noise and unnecessary cam/b...

Description Accurate plate that helps you determine the extra 90° that is to be turned when installing the head bolts. Head bolt torque sequence is...

Description With 12 & 14mm threaded ends. Used to help hold the cylinder head firmly in a workbench vice; through the spark plug hole; to aid i...

Description Used to remove & install the slotted lock nut; on wire wheels (spoked wheels) with drum brakes; to correct torque Fitment67-72 Big ...

Description Used to remove and replace the swingarm bushing assembly (cleve blocks / OEM 47556-81). Prevents damage to the bushing assembly Fitment...

Description Used to install the swingarm in a 5-speed rubber mount frame. When the bushing assemblies (cleve blocks) are replaced they need to be p...

Description Two-piece design; Used to install & remove the races in the frame neck or in the frame cup. The optional 978339 X-tra grip driver s...

Description Used to press-in frame neck bearing races and frame cups; straight and true without damage. Note: See 962041 for 14-up Touring; Trikes....