{"product_id":"mcs8110729","title":"Ebc V-Pad Semi Sintered Brake Pads - Rear: Bmw : 2005-2009 Hp2 Enduro…","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eEBC V-Pads are Semi-Sintered brake pads that combine the highest qualities of an organic brake pad with the endurance of a sintered equivalent brake pad. The Vee brake pad range are designed for the heavy cruiser\/streetbike market as a replacement brake pad. Low heat generation and offer reduced rotor galling and extended life and can be used to replace organic or sintered brake pads. ECE R 90 approved. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear: BMW : 05-09 HP2 Enduro\u003c\/li\u003e\n\u003cli\u003e10-11 K1300 GT SE (Disc has fixed bobbins - Fitting kit required)\u003c\/li\u003e\n\u003cli\u003e09-11 K1300 GT (4.5mm thick disc. Fitting kit required. Check disc thickness)\u003c\/li\u003e\n\u003cli\u003e16-20 R Nine T Café Racer K32\/1170cc (Disc has fixed bobbins - Fitting kit required)\u003c\/li\u003e\n\u003cli\u003e14-20 R Nine T K21\/1170cc (Disc has fixed bobbins - Fitting kit required)\u003c\/li\u003e\n\u003cli\u003e16-21 R Nine T Pure K22\/1170cc (Disc has fixed bobbins-fitting kit required)\u003c\/li\u003e\n\u003cli\u003e16-21 R Nine T Scrambler K21\/1170cc (Disc has fixed bobbins-fitting kit required)\u003c\/li\u003e\n\u003cli\u003e17-21 R Nine T Urban GS (K33\/1170cc) (Disc has fixed bobbins-fitting kit required)\u003c\/li\u003e\n\u003cli\u003e20-21 R Nine T \/5 K21\/1170cc (Disc has fixed bobbins-fitting kit required)\u003c\/li\u003e\n\u003cli\u003e93-99 R1100 GS (STD \u0026amp; ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e94-96 R1100 R 1993-May 1996 (Spoke wheel)\u003c\/li\u003e\n\u003cli\u003e93-01 R1100 R (Cast Wheel - Remove rotor outer ring from centre casting and refit. )\u003c\/li\u003e\n\u003cli\u003e94-01 R1100 RT (Cast Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e94-01 R1100 RT (Spoke wheel)\u003c\/li\u003e\n\u003cli\u003e96-00 R1100 S 1996-Nov. 2000 (ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e00-06 R1100 S Dec. 2000-2006 (With Integral ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e00-06 R1100 S Dec. 2000-2006 (Without Integral ABS)\u003c\/li\u003e\n\u003cli\u003e01 R1150 GS Adventure Evo R21A 0441\/0492 (July-2001-2006 - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e02-06 R1150 GS Adventure Evo R21A 0441\/0492 - July 2001-2006 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e01 R1150 GS Evo R21\/0415\/0495 (Nov. 2001-2003 - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e02-03 R1150 GS Evo R21\/0415\/0495 - Nov. 2001-2003 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e98 R1150 GS R21\/0415\/0495 (1998-Oct. 2001 - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e99-01 R1150 GS R21\/0415\/0495 - 1998-Oct. 2001 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e03-06 R1150 R Rockster\u003c\/li\u003e\n\u003cli\u003e04 R1150 R Rockster Edition 80\u003c\/li\u003e\n\u003cli\u003e01-06 R1150 R\u003c\/li\u003e\n\u003cli\u003e01-04 R1150 RS (Integral ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e00-06 R1150 RT (Integral ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e00-02 R1200 Independent (Cast wheel)\u003c\/li\u003e\n\u003cli\u003e00-02 R1200 Independent (Spoke wheel)\u003c\/li\u003e\n\u003cli\u003e03-04 R1200 C Classic (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e03-04 R1200 C Independent (Cast Wheel - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e04 R1200 C Montauk (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e96-02 R1200 C (Cast Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e96-02 R1200 C (Spoke Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e11-13 R1200 R Classic (Disc has fixed bobbins Fitting kit required)\u003c\/li\u003e\n\u003cli\u003e06-07 R1200 R K27\/0378 (Disc has fixed bobbins - Fitting kit required)\u003c\/li\u003e\n\u003cli\u003e07 R1200 R K27\/0378 (Dec.2007-2014 - Disc has fixed bobbins - Fitting kit required)\u003c\/li\u003e\n\u003cli\u003e08-13 R1200 R K27\/0378 - Dec. 2007-2014 (Disc has fixed bobbins - Fitting kit required)\u003c\/li\u003e\n\u003cli\u003e06 R1200 S K29\/0366 (Nov-2006-2007 - Discs have loose bobbins)\u003c\/li\u003e\n\u003cli\u003e07 R1200 S K29\/0366 (Dec. 2007-2008 - Disc has fixed bobbins - Fitting kit required)\u003c\/li\u003e\n\u003cli\u003e07 R1200 S K29\/0366 - 2006-Nov. 2007 (Discs have loose bobbins)\u003c\/li\u003e\n\u003cli\u003e08 R1200 S K29\/0366 - Dec. 2007-2008 (Disc has fixed bobbins - Fitting kit required)\u003c\/li\u003e\n\u003cli\u003e07 R1200 ST K28\/0328 (Dec-2007-2008 - Disc has fixed bobbins - Fitting kit required)\u003c\/li\u003e\n\u003cli\u003e03 R1200 ST K28\/0328 (Nov-2003-2007 - Discs have loose bobbins)\u003c\/li\u003e\n\u003cli\u003e04-07 R1200 ST K28\/0328 - 2003-Nov. 2007 (Discs have loose bobbins)\u003c\/li\u003e\n\u003cli\u003e08 R1200 ST K28\/0328 - Dec. 2007-2008 (Disc has fixed bobbins - Fitting kit required)\u003c\/li\u003e\n\u003cli\u003e97-00 R850 C (Cast Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e97-00 R850 C (Spoke Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e96-00 R850 GS (STD \u0026amp; ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place. Remove outer ring fom centre casting and refit.)\u003c\/li\u003e\n\u003cli\u003e94 R850 R (1994-May 1996 - Spoke wheel)\u003c\/li\u003e\n\u003cli\u003e94-02 R850 R (Cast Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e04-06 R850 R\u003c\/li\u003e\n\u003cli\u003e95-96 R850 R - 1994-May 1996 (Spoke wheel)\u003c\/li\u003e\n\u003cli\u003e96-01 R850 RT (Cast Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)\u003c\/li\u003e\n\u003cli\u003e96-01 R850 RT (Spoke wheel)\u003c\/li\u003e\n\u003cli\u003e06 R850 RT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e EBC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Brake \u0026gt; Brake pads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit:\u003c\/strong\u003e pr\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e 8110729\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePart Numbers\u003c\/h2\u003e\u003cp\u003eMCS Part Number: 8110729\u003cbr\u003eManufacturer Part Number: FA363V\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":57380185080195,"sku":"MCS8110729","price":21.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1329\/4265\/files\/8110729m.jpg?v=1786054300","url":"https:\/\/hogparts.co.uk\/products\/mcs8110729","provider":"Hogparts UK Ltd","version":"1.0","type":"link"}